When the thyristor is damaged and needs to be inspected and analyzed for its cause, the core can be removed from the cooling jacket, the core box can be opened, and the chip can be removed to observe the traces after the damage to determine the cause.
Categories：Product knowledge Date：2025-01-09 Hits：631 View »
When the thyristor is damaged and needs to be inspected and analyzed for its cause, the core can be removed from the cooling jacket, the core box can be opened, and the chip can be removed to observe the traces after the damage to determine the cause.
Categories：Product knowledge Date：2025-01-09 Hits：530 View »
Medium frequency power supply is a device that converts three-phase power frequency (50Hz) AC power into single-phase medium frequency AC power.
Categories：Product knowledge Date：2025-01-08 Hits：468 View »
According to the installation method on the PCB board, there are two main types of MOS tube packaging: through hole and surface mount.
Categories：Product knowledge Date：2025-01-08 Hits：788 View »
What is the principle of fast recovery diode surge failure? What is the difference between avalanche failure and edge failure of fast recovery diodes?
Categories：Product knowledge Date：2025-01-08 Hits：502 View »
In today's semiconductor industry, heat dissipation can almost be said to be the most important aspect that cannot be ignored except for PPA (power consumption, performance, and area). Taking mobile SoC as an example, the problem of chip overheating and frequency reduction affects any smartphone on the market.
Categories：Product knowledge Date：2025-01-07 Hits：458 View »
The technical indicators used to indicate the performance and applicability of diodes are called diode parameters, and different types of diodes have different characteristic parameters.
Categories：Product knowledge Date：2025-01-07 Hits：605 View »
The exterior of a vacuum diode is a metal or glass cover, and the air inside is precisely extracted to form a vacuum state.
Categories：Product knowledge Date：2025-01-07 Hits：494 View »
The rectifier bridge stack product is composed of four rectifier silicon chips connected in a bridge configuration and encapsulated with insulating plastic. The high-power rectifier bridge is encapsulated with a zinc metal shell outside the insulation layer to enhance heat dissipation.
Categories：Product knowledge Date：2025-01-06 Hits：545 View »
In general, there are three numbers in the naming of rectifier bridges. The first number represents the rated current, A; the last two numbers represent the rated voltage (number * 100), V
Categories：Product knowledge Date：2025-01-06 Hits：572 View »
